Extraudio High End Audio
  • Home
  • Company
    • About Us
    • Legal Note
    • Privacy Policy
    • Cookies
    • Sitemap
  • Products
    • Artisan Valves Series
      • Integrated Amplifier X250 Pure Class AD
      • Preamplifier XP1 Pure class A
    • Artisan Solid-State Series
      • Integrated Amplifier X250T Pure Class AD
      • Power Amplifier XP-A500 Class AD completely balanced
      • Power Amplifier XP-A1000 Class AD completely balanced
    • Artisan Audio Cables
    • Accesories
  • Review/Videos
    • Review
    • Videos
  • Support
    • Warranty Conditions
    • Product Registration Warranty
    • Service and Upgrade
  • Contact
  • Where to Buy
  • Gallery

Extraudio Integrated Amplifier X250T Pure class AD "The linearity and neutrality of the transistor, with the new class AD amplification from Extraudio."
Extraudio a different concept focused on satisfing the experience of the audiophile...

Amplification with pure class A transistors provide great sound quality, being very linear, low noise and low distortion. the Extraudio X250T is an amplifier that works with the full wave and is double real monophonic with quadruple power supply, a real double monophonic with a bandwidth in its preamplifier section of up to 750Khz ...

Some of the main challenges of this model was to create something different, but with the same sound character of the models of tubes with solid state amplification, with the linearity and very little distortion of the transistors, but at the same time very musical, with soul and a great dynamics and timbre, dual monophonic to transmit the perfect stereo sensation, maximum energy and emotion of the music.

We wanted to keep the sound we like, with harmonics, micro details and with the feeling of live or live music, extra transparency and a lot of 3D holography, respecting the silences a lot, separating the low, medium and high areas of the frequency spectrum without any part being mixed or affected or mixed by the other areas of the frequency range.

In this model we wanted to contain the price, but without reducing the quality of the sound, neither of the mechanical parts, nor of the finishes.

All this we have achieved and synthesized in the X250T, so that you can enjoy your recorded music collection and rediscover it again, enjoy the music.

This integrated amplifier, just like any Extraudio product, captures the musician’s intentions and reproduces each and every one of the nuances of the music rapidly, smoothly, and with a warm, velvety sound; it is macro detailed but without sounding aggressive or producing listening fatigue – you will want to keep turning up the volume.

The X250 integrated amplifier offers us the characteristic Extraudio sound; extremely powerful while retaining all the nuances. It’s a great allrounder.

At Extraudio, we believe that the preamplifier creates 90% of the sound, so we have worked at this stage to develop an absolute reference product and always based on our "less is more" mantra.

Review: HifiNews UK, X250T
Review: The Audiophile Man Mr. Paul Rigby UK, X250T
Video Review: The audiphile man, Mr. Paul Rigby UK,X250T

This product X250 includes our exclusive Extraudio remote control.

Our remote control has been conceived from a different approach – seeking the convenience of the user. Extraudio wished to offer battery life and operating distance as its main features and these objectives have been achieved.

The remote control does not have removable batteries but has a rechargeable internal battery that only needs recharging after 100 days in conditions of normal use.
It includes an integrated USB battery charger with a charge indicator that can be used with any USB port.

The transmission range is from 20 to 80 meters, "depending on the country used and electromagnetic and RF interference".

The design is minimalist according to Mies Van Der Rohe’s philosophy of “less is more”. There are only four buttons: On, Off, Volume up and down and Mute. The concept behind this remote control is unusual but in the end it is a more efficient and ergonomic creation.

Frequency response:
20Hz to > 250Khz +0dB / 7Hz to 750Khz -3dB "preamp section"
10Hz to 50Khz "integrated amplifier"

Noise level dynamic range / dBA:
> 104db

Total armonic distortion / THD:
THD+N: 0,0015% @ 1W (8 Ohm, 1Khz)

Gain:
Max voltage gain: 26dB

Input impedance:
120K ohms Balanced, 60K ohms RCA

Processor AV input: 0dB RCA and XLR output.
Analog inputs: 4 pair unbalanced RCA + 1 Pair Balanced XLR +
Processor AV (RCA and XLR connectors)
Inputs (6): PHONO, CD, TUNER, AUX (RCA).
BALANCED (XLR). IN PROCESSOR AV
(XLR and RCA connectors).

Maximum input:
20V RMS BAL, 10V RMS RCA.

Crosstalk:
Separation of stereo channels: > -80dB or better at 1kHz and 10 kHz.

Controls:
62 Volume steps. (ALPS BLUE BEAUTY Motorized, controlled by microcontroller), Select Input, optical rotary encoder (ALPS 18 steps).a

Power requirements:
100V, 120V or 230VAC 50/60Hz, 79 watts – 0,5w standby

Power consumption:
Energy Star & EU specs, Extraudio X250T Pure Class AD is equipped with a high power amplification module with very low power consumption, with an energy efficiency of 94.4%.

Dimensions:
44,5 cm W by 12,5 cm H by 39,5 cm
D 56,5 cm W by 24 cm H by 52,5 cm D (shipping)

Weight:
39 lbs. (18 kg) Net; 52 lbs. (24 kg) Shipping.

Power Output:
2 X 250Wrms @ 1% THD+N, 20Hz – 20Khz, 4 Ohm
2 X 150Wrms 8 Ohm “both channels driven”

These pre-specifications are subject be changed without notice.
EXTRAUDIO BV, The Netherlands

EXTRAUDIO POWER SUPPLIES: Extraudio’s six power supply, the Extraudio power supplies are responsible for providing harmonics and food for Extraudio products. Extraudio power supplies have been designed with five basic concepts, specially designed for audio products, calculated in audio frequency and not in electrical frequency, they consist of three stages: transistorized for maximum current delivery, regulated for a minimum ripple and with Stabilization protection for a very low noise level and high protection for audio stages and circuits. Power supply Audio grade capacitor “Elna, Jantzen, Mundorf, Jupiter wax” Soft start circuit for protection, Automatic 60 seconds warm-up/brown-out mute, All power supplies and product power on is controlled by microcontroller. EXTRAUDIO CHASSIS: Extraudio chassis are robust and durable and function as a precise technical solution, designed to protect and enhance Extraudio sound. The chassis is a kind of safety box in which we keep our electronic PCBs and eliminate external interference and vibrations. All parts of the chassis were designed and built to a greater than normal thickness, to cancel out vibrations and provide better isolation from interference. The aluminum used in its construction is that of the best aeronautical quality, resulting in superior firmness and conductivity.

ELECTRONIC COMPONENTS:
All the electronic components and pieces are assembled by hand in Europe by fully qualified personnel. All the electronic components are selected and paired by hand, so that the stereo sensation is precise, the exact timbre and ultimately the absolute sound, this is one of the secrets of Extraudio products, no machine can choose and weld the components with this level of tolerance and accuracy, from that accuracy Extraudio sound is born, an incredible stereo image where instruments can be seen and played, a transparent, silent sound and an impressive 3D holography.

All Extraudio products incorporate Vishay Sprague Tantalum, Mundorf, Jantzen or Jupiter Wax capacitors paper in oil audio grade.
Reed Relay audio for low signals.
Premium Gold fuse for audio applications.
Premium Elna SILMIC II electrolytic capacitors for audio applications.
Premium Alps Blue Beauty motor potentiometer for volume control, Alps rotary encoder.
Gold-plated RCA input.
Gold-plated XLR neutrik for balanced input
Heavy-duty pure gold plated speaker terminals "WBT Germany".

EXTRAUDIO POWER AND AUDIO TRANSFORMER:

The formulation of the different Extraudio transformers has taken us 2 years of Research and development, more than 30 prototypes were necessary to reach the desired quality, since our products can undergo sound ripples, we use specific toroids with our exclusive core of sand, not ferric.

Our transformers are manufactured only in Europe, expressly formulated for audio products, complying with IEC standards, with UL / CSA certifications, with KEMA KEUR (ENEC).

The Extraudio transformer was designed and built without compromising reliability. It ensures: low radiation, low mechanical vibration, high quality cabling, sand core and no hum, especially for low audio signals.

Complements, accessories and unique options, created to exponentially increase your Extraudio system.
With these accessories you will get the highest quality Extraudio experience, just as we have designed it for you to get and enjoy the absolute sound that we all seek.

HP1 Option, internal PCB, turntable preamp for MM type cartridge, minimalist construction.
Extraudio Artisan High End audio cables.

Facebook
Twitter
YouTube
Instagram

Copyright © 2020 Extraudio BV. All Rights Reserved.

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.OkNoCookies