XP-A2000 Mono Power Amplifier, solid-state/class AD

Ultra powerful monophonic power amplifier

XP-A2000 detail

Image for illustrative purposes; check the finishes availables with your dealer.

Designed in the Netherlands.

XP-A2000 Ultra Power Amplifier
– Pure Class A input buffer with BJT transistors
– Dual power supply, fully balanced power amplifier
– Frequency response: 2 Hz to 110 kHz +0 dB
– Noise floor: -160 dB at 4Ω
– Dynamic range: > 120 dB
– Total peak output current: 90 Amp
– Extraudio EPAM amplification modules
– Ultra output power: 2400 W at 4Ω / 1500 W at 8Ω
– 1 RCA / 1 XLR input
– 4 Classic Signature Platinum binding posts (Germany WBT)
– 1 Ground binding post for grounding free loudspeakers
– Trigger input and output connectors
– < 0.5 W (Green Energy Star & ErP 1275/2008/EC compliant)
– Power supply RMS power limit: 1500 W
– Three EMI and RF anti-interference AC input filters

Extraudio is a company that has been researching, developing and incorporating innovations in amplification equipment for more than a decade to achieve a real, absolute sound that excites the listener.

One of the latest exponents of that research and development is the Extraudio XP-A2000 Mono ultra power amp.

Advantages of using Extraudio XP-A2000 Monophonic Power Amplifiers:
Sound quality: spaciousness, improved stereo image, and 3D holography.
Energy efficiency: work at low temperature controlled by microcontroller and also only amplify one channel, which extends the life of the product.
Construction and design: dual mono minimizes unwanted interference and distortion. Advanced protection systems that protect your Loudspeakers.
Flexibility and versatility: connectivity and configuration options, RCA and XLR inputs, dual speaker outputs for bi-wiring or bi-amplification.
Minimalist industrial design but robust and durable construction with 6000 aeronautical aluminum


Image for illustrative purposes; check the finishes availables with your dealer.


The electronic design of the Extraudio XP-A2000 is based on One fully separate monophonic power amplifier module with balanced inputs, an input buffer with pure class A polarized BJT transistor stages, and one high-power, energy-efficient EPAM modules.

The RCA and XLR audio input feature a new pure Class A buffer input with BJT transistor, providing dynamic, analog sound. BJT-type transistors offer the best sound, extending down to very low frequencies.


In reference to design and aesthetics, we accentuate the Extraudio style: minimalist, timeless, and neutral. The Extraudio equipment integrates perfectly into any home, be it modern or classic, embodying in all of them our philosophy of “less is more”.

In the chassis, we have applied our constructive experience, based on the use of solid panels of aeronautical aluminum 6000 of the highest hardness and quality. This construction provides solidity and durability to the product, minimizing vibrations.

The front aesthetics of the XP-A2000 stage is straightforward, limited to a single power button on the front panel. Everything else is controlled by our software inside the power amplifier.

The finishes, application of the layers of paint where we apply our three black, white, or gray colors Composed specifically for us with a ceramic finish and finally one or two coats of the exclusive “High Gloss varnish” mixed with bi-component epoxy for hardening, which is applied in a pressurized varnishing chamber.

Image for illustrative purposes; check the finishes availables with your dealer.


The Extraudio XP-A2000 offers very high controlled power, thanks to our new EPAM modules of 1500 watts at 4 ohms.

The Extraudio XP-A2000 also offers a maximum current of 90 amps per power amplifier, which, together with a greater damping factor of 1000 at 8 ohms, allows full control of any speaker model.

The true value of the watts of a power amplifier cannot be compensated or masked, and that, at Extraudio, we know. The only way to get 1500W of real sound, for example, is to have a power supply that generates 1500W peak and high current intensity, in the case of the XP-A2000 it is One 1500W peak power supplies.

The XP-A2000 power amplifier has a power supply that delivers a total current of 90 Amps, along with an impressive 1500 W  power reserve, so that any complex musical passage, such as those present in a symphony, is reproduced in all its glory, without loss, latency or distortion.

At Extraudio we add the intelligent management of consumption with our own energy efficiency control software integrated into the XP-A2000 so that the optimization of electricity consumption is absolute.

This combination of technologies has been developed at Extraudio since 2008. The XP-A2000, in addition to unmatched sonic performance, also offers unprecedented energy efficiency.


The Extraudio XP-A2000 incorporates built-in protection functions to protect the power amp against abuse or extreme use and to prevent the speakers from being damaged in the event of an incident.

These protections focus on temperature control, electrical overvoltage, DC protection, and HF protection.


The sound of the XP-A2000 ultra power amp is something to experience firsthand. It is very difficult to put into words the extraordinary sensations that this new power amp transmits, so we recommend visiting an official Extraudio dealer to live and enjoy this experience.

Those who have heard it agree to define the Extraudio XP-A2000 as “an exciting ultra power amp, unmatched control and absolute sound at all frequencies.”

“Enjoy your music with Extraudio products“.

Image for illustrative purposes; check the finishes availables with your dealer.

Input buffer: Input stages Pure Class A BJT technology.

Frequency Response: 2Hz to 110Khz +0dB

Noise Floor: -160dB

Dynamic range / dBA: > 120dBA

THD+N (1kHz @ 1W): 0.003 %

Peak output current:
90Amp x1

Voltage Gain:

Damping Factor:
>1000, (8 Ω load, 1 kHz and below)

Extraudio EPAM amplification modules
Ultra Output Power:
Extraudio EPAM amplification modules
Ultra Output Power: 2400W 4Ω / 1500W 8Ω

Input impedance:
Balanced 7k2 Ohm / RCA SE 3K6 Ohm

Power consumption:

Stand-by: 0.5W
Idle: 19W
(115V or 230VAC 50/60Hz)

< 0.5 W (Green Energy Star & ErP 1275/2008/EC compliant)

Safety approved and verified for EMC compliance
Power Supply RMS Power Limit: 1500W

(Product W x H x D)
44 x 12 x 40 cm
(Shipping W x H x D)
66 x 66 x 37 cm

(18 kg) per unit
(20 kg) Shipping per unit.


Analog inputs:
1 unbalanced RCA
1 Balanced XLR

4 Classic Signature Platinum Binding Post Germany WBT,
is possible to configure it at the factory in bi-wiring 1,500W X1 or bi-amplified 800W X2
1 Ground Binding Post for Grounding free Loudspeakers
Trigger connectors input and output.

These pre-specifications are subject be changed without notice. EXTRAUDIO BV – 2022 (The Netherlands)

Extraudio products are both unique and exclusive, hand-made and long-lasting, beautiful works of art for audiophiles.

Contact us

  • Post mail: Extraudio BV, Gravin Juliana Van Stolberglaan 31, office A8875, 2263 AB Leidschendam, The Netherlands
  • info@extraudio.com


    Copyright 2022 Extraudio BV. All rights reserved.