XP-A800 MKII Power Amplifier solid-state
An exciting and unique sound muscle ...
XP-A800 Power Amplifier solid-state. Pure Class A Input buffer with BJT transistor input stages
Dual power supply, fully Balanced Stereo Power Amplifier
Frequency response 2Hz to 110Khz
Noise Floor: -150dB 4Ω
Dynamic range: > 110dB
Total, peak output current: 80 Amps / 40Amp x2
Extraudio EPAM amplification modules
Ultra Output Power: 800W X2 4Ω / 400W X2 8Ω
2 RCA / 2 XLR Inputs
WBT Germany Speakers Connectors
Trigger Input and Output Connectors
< 0.5 W (Green Energy Star & ErP 1275/2008/EC compliant)
Power Supply RMS Power Limit 1500W
Three EMI and RF anti-interference AC input filters
One of the latest examples of this research and development is the Extraudio XP-A800 stereo power amplifier.
The electronics design of the Extraudio XP-A800 is based on our reference XP-A1500 power amplifier and features our revolutionary energy-efficient, high-power EPAM amplifier modules.
The RCA and XLR audio inputs incorporate a new pure Class A input buffer with BJT transistor input stages for a dynamic, analog sound. The BJT-type transistors provide the best sound, extending down to very low frequencies.
In terms of design and aesthetics, we emphasise the Extraudio style: minimalist, timeless and neutral. The Extraudio systems fit perfectly into any home, whether modern or classic, reflecting our philosophy of “less is more”.
In the chassis, we have applied our construction experience, based on the use of solid 6000 aeronautical aluminium panels of the highest hardness and quality. This construction provides strength and durability to the product, minimising vibrations.
The front aesthetics of the XP-A800 stage are simple, being limited to a single power button on the front panel. Everything else is controlled by our software inside the power amplifier.
Image for illustrative purposes; check the finishes availables with your dealer.
The Extraudio XP-A800 delivers controlled power in spades, thanks to our new 800 Watts x2 at 4 Ohms and 400 Watts x2 at 8 Ohms EPAM modules.
The Extraudio XP-A800 also delivers a peak current of 40 Amps per channel, which, together with a higher damping factor of 700 at 8 Ohm, allows full control of any loudspeaker model.
The real wattage value of a power amplifier cannot be invented or masked, and at Extraudio know that. The only way to get 1500W of real sound, for example, is to have a power supply that generates a 1500W peak and high current.
The XP-A800 has a power supply that delivers a total current of 80 Amps coupled with an impressive 1500W of reserve power, so that any complex musical passages, such as those in a symphony, are reproduced in all their glory, without any loss, decay or distortion.
At Extraudio we add intelligent power management with our own energy efficiency control software built into the XP-A800, so that power consumption is fully optimized.
This mix of technologies has been developed at Extraudio since 2010. The XP-A800, apart from unrivaled sonic performance, also offers unprecedented and unrivaled energy efficiency.
Image for illustrative purposes; check the finishes availables with your dealer.
The Extraudio XP-A800 incorporates built-in protection features to protect the power amplifier against abuse or extreme use, and to prevent damage to the loudspeakers in the event of an incident.
These protections focus on temperature control, over-voltage, DC protection and HF protection.
The sound of the XP-A800 power amplifier is something that has to be experienced first-hand. It is very difficult to express in words the extraordinary sensations that this new power amplifier transmits, so we recommend visiting an official Extraudio dealer to live and enjoy this experience.
Those who have heard it agree that the Extraudio XP-A800 is “an exciting power amplifier, with unrivalled control and absolute sound at all frequencies”.
“Enjoy your music with Extraudio products”.
Frequency Response: 2Hz to 110Khz +0dB
Noise Floor: -150dB
Dynamic range / dBA: > 110dBA
THD+N (1kHz @ 1W): 0.003 %
Peak output current:
40Amp x2
Voltage Gain:
28dB
Damping Factor:
>700, two-channel (8 Ω load, 1 kHz and below)
Extraudio EPAM amplification modules
Ultra Output Power: 800W X2 4Ω / 400W X2 8Ω
Input impedance:
Balanced 7k2 Ohm / RCA SE 3K6 Ohm
Stand-by: 0.5W
Idle: 19W
(115V or 230VAC 50/60Hz)
< 0.5 W (Green Energy Star & ErP 1275/2008/EC compliant)
Safety approved and verified for EMC compliance
Power Supply RMS Power Limit: 1500W
Dimensions:
(Product W x H x D)
44 x 12 x 40 cm
(Shipping W x H x D)
66 x 66 x 37 cm
Weight:
(16 kg)
(20 kg) Shipping.
Analog inputs:
1 Pair unbalanced RCA
1 Pair Balanced XLR
Outputs:
Speakers connectors, WBT Germany.
Trigger connectors input and output
These pre-specifications are subject be changed without notice. EXTRAUDIO BV – 2022 (The Netherlands)